Description
The H-Shoulder Harness is part of our STRIKE SUITE. Compatible with our Multi-Role Placard, our Small (6 cell) and Medium (10 cell) placards, and many other commercially available placards/chest rigs.
When these placards are used as a stand alone unit, and not installed directly on the fragmentation vest, the H-Shoulder Harness is an integral piece of that stand-alone rig set up.
Along the base of the straps we've sewn two 1" webbing loops, which can be used to mount 1" quick attach surface mount buckles (QASM). The loops themselves can also be used to clip push-to-talks. If some height adjustability is desired optional 1" QASM buckles are available separately here >
Above the two 1" webbing loops, you'll see three loops sewn perpendicular. Our PRR Pouch can be mounted here with a malice clip, either on the left or right side, depending on user preference. The center loop is elastic and also protrudes from the side, allowing the user to feed through a comms wire, push-to-talk wire, or a hydration drinking tube.
The flip side of the H-Shoulder Harness is fully loop lined, allowing it to be compatible with most commercially available plate carrier shoulder strap pads. We also make our own Trifold Shoulder Pads specifically for this, available here >
To hold up to the wear and tear of rough field use, we've constructed these with military spec webbing, which is then covered in 500 denier Cordura nylon fabric. At the top by the neck area there is a piece of loop Velcro, which can be used to mount a hydration carrier.
🇨🇦🇺🇸 Made in the USA & Canada.
STRIKE SUITE Compatible
Our new line of tactical gear that is represented by the acronym STRIKE SUITE meaning:
STandardized Rapid Integration Kinetic Equipment - Scalable Universal Individual Textile Ensemble.
The STRIKE SUITE represents a family of products designed to work together and with other industry standard products to provide the end user the most modular and scalable solutions to the problems posed by changing mission sets.
